The mitre saw is capable of a 4" deep cut in timber and a width of over 12". To speed up cutting we include a mains powered (no batteries!) twin laser guide with one laser aligned to each side of the blade. Pencil lines drawn on timber ready to cut can quickly be lined up with the blade.
The required mitre angle can be quickly and accurately locked in, using the large comfy rubber grip at the front of the table. A large scale marked out in degrees allows any angle up to 48 degrees left or right to be set and locked off, although the most commonly used angles are pre-set and will engage automatically.
The double bevel feature which allows the blade to tilt to the left or right is a great benefit when doing jobs requiring lots of bevel cuts such as fitting skirting boards. Any angle can be locked off, although once again the most commonly used angled have pre-set stops which locate automatically.
Motor (Carbon Brush): 2000w (240v)
Blade Diameter: 305mm
Blade Bore: 30mm
Blade Speed: 4500rpm
Depth of Cut at 90 Degrees: 105mm
Depth of Cut at 45 Degree Bevel: 65mm
Width of Cut at 90 Degrees: 340mm
Width of Cut at 45 Degree Mitre: 240mm
Blade Mitre Adjustment: 0-48 Left & Right
Pre-set Mitre Angles: 0, 15, 22.5, 30, 45
Blade Bevel Adjustment: 0-45 Left & Right
Pre-set Bevel Angles: 0, 15, 30, 45
Dimensions (W x D x H): 930mm x 850mm x 760mm
12 Months Guarantee!